Brass and Composite Fittings

Designing the right products for the application is our most important commitment. Only Parker offers elbows and tees manufactured from both extruded and forged shapes.
Extruded Fittings
The Extrusion process produces a dense, non-porous material somewhat stronger in the longitudinal direction because the flow of the grain is oriented.
Forged Fittings
The Forging process produces a uniformly dense material on exceptional strength. Because grain flow follows the contour, the fitting has high impact strength and is resistant to mechanical shock and vibration.

Brass Ball Valves

The forged body ball valve provides extended service life and resists failure caused by severe temperature applications. Optimum flow design assures maximum system efficiency. Highly inert PTFE seats and seals provide resistance to chemical corrosion. Parker also provides a blow-out proof stem, chrome plated brass ball and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability.

Carbon Steel Ball Valves

The carbon steel ball valves have a hex shaped body for easy installation. Highly inert PTFE seats and seals combined with an external phosphate coating provide superior corrosion resistance. Parker also provides a blow-out proof stem and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability.

Stainless Steel Ball Valves

The Cast Body is manufactured from CF-8M Stainless Steel, the cast equivalent of 316 Stainless Steel. They are ideal for corrosive environments such as chemical plants and refineries. The full flow design assures maximum operating efficiency. The reinforced PTFE seats and seals, coupled with the 316 Stainless Ball and blow-out proof stem, result in the utmost reliability.

Additional Ball Valves and Componentry

Mini Ball Valves
The Mini-Valve is to be used in confined and hard to reach applications. The Brass extruded body allows for extended service life and is chrome plated as standard. Features of the MV608/609 valves include blowout proof stem, hard chrome plate ball, PTFE seats, viton stem seals, and standard yellow handle. MV200 valve features a black lever handle.
Stem Extender Kits
Stem Extenders can be attached easily to any standard size Parker Ball Valve. Kits are available in 1-1/4" and 2-1/4" clearances for Parker Brass Ball Valves up to 1" and Parker Stainless Steel Ball Valves up to 2". All stem extender components are made from 300 Series stainless steel.
Rotary Actuator
A reliable dual vane actuator delivering maximum torque in a small envelope size. Torque output is uniform in both directions, with zero backlash for precise positioning, and guaranteed zero external leakage.
Replacement Componentry
In addition to standard lever handles, most Parker Ball Valves are available with Short Lever Handles, Oval Handles, Tee Handles and Handle Covers.

General Purpose Valves

For over a decade, the Brass Products Division has been a resource for low volume, custom-designed brass valves. Our Short Run Specials Department is organized specifically to produce very small lots - even one piece - on an extremely fast turn-around. With our flexible CNC equipment, we can manufacture to customer specifications. We can produce valves in virtually any configuration, with any connector end. In short, if it's made from brass, we can do it. Parker is continually working to make its manufacturing operations and technology even better. Beginning with a corporate commitment to quality, from the machine operator in the plant to the individual at the Parker Service Center, everyone understands the importance of doing their best every time.

Tools & Tube Fabricating Equipment

Tube Cutters
Parker Brass hand tube cutters are designed to make uniform clean square cuts easier and with the least possible burrs. Use built-in deburring blade on each cutter, or the In-Ex® deburring tool to remove any burrs that appear.
Tube Benders
Parker’s hand benders include built-in features to help you make accurate bends without kinks or wrinkles and with minimum flattening in tubing, from size 2 (1/8" O.D.) to 16 (1" O.D.).
45° Flaring Tools
Parker makes the right type and size of flaring tool to meet the requirements of your job. Each one is designed to help you produce correct concentric flares, of the correct flare diameter, for dependable joints that are free from pullout under pressure.
Tubing Tool Kits
Compact kits contain combinations of tools to cut, flare, and/or ream tube end connections.
Swaging Tools
Use these tools for making tubing connections without fittings. Enlarge end of tube, insert another tube, solder like a sweat fitting.
Wrenches
Par-Lok® wrench jaws are constructed from drop-forged, high carbon steel material with a black conversion coat finish. Par-Lok® handles are made from heavy gauge steel material, heat treated and with a corrosion resistant black finish. Solid stainless steel rivets and tempered jaw springs are designed into every wrench for maximum strength.
Tube Fabricating Equipment
Includes Pinch Off Tool, In-Ex® Tube Deburring Tool, Tru-Kut® Sawing Vise, and Multi Flame Torch.

Accessories

Bins
Bin compartments have open hole storage bins for easy visual identification and retrieval. In addition, Parker Brass offers stackable unit cabinets with slide out drawers and dividers to create a compact, expandable point-of-purchase display.
Bin Labels
Self adhesive labels for identifying Parker fittings and valves in Parker cabinets 40B and 35B. General line set includes all product lines. Individual product line labels also available. Custom Bin Labels are available by purchasing Catalog 3501CD.
Copper Tubing
Parker offers copper tubing available in 50-foot coiled rolls.