Pneumatic Hydraulic Diagnostics Check Alternative Fuels Swivels
PneumaticCouplings
Pneumatic couplings, also referred to as single shut-off (SSO) couplings, are typically used in compressed air applications to connect air tools, equipment and hoses. Additional applications include other gases and low pressure liquids. Parker pneumatic couplings are offeredin a wide range ofinterchanges, sizes, materials, ports and other options to satisfy most every pneumatic application
Hydraulic
Couplings
Wide variety of designs each tailored to a particular application. Based on valving, hydraulic couplings generally are either Double Shut-Off or Straight-Thru. Double Shut-Off couplings contain shut-off valves in both halves, body and nipple. Used extensively when loss of fluid is undesirable. Straight-Thru couplings have no valves in either half and are ideal for maximum flow applications.
With Parkerdiagnostic equipment you can take critical measurements from your system with just a push of a button. Parker diagnostic instruments are designed to identify hard-to detect variations and peaks in pressures, temperatures and flow. Parker diagnostic quick couplings and nipples allow quick and easy access into hydraulic or pneumatic systems at remote test points without the use of tools. Diagnostic nipples can be permanently installed in threaded test ports in hydraulic components such as valves, cylinders, accumulators, filters or pumps. Diagnostic tube ends, used in conjunction with a 37° flare, bite type, or O-ring face seal tube fitting, will allow you to take pressure readings in your systems tubing and hose lines where threaded test ports may not currently be available. From diagnostic nipples to digital readout and printing equipment, Parker can provide you, from over 600 stocking distributors, the tools necessary to increase your productivity through reduced machine downtime.
Unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid backpressure. Configurations include standard in-line, cartridge style, and split-flange mounting units.
Parker Hannifin is a world leader in the design and manufacture of high-quality components used for CNG (compressed natural gas) and LNG (liquid natural gas) applications on vehicles, fueling and dispensing equipment. Parker offers the most complete selection of connector products including: NGV1 profile nozzles and receptacles for efficient fueling, and hose for dispensing; fittings and valves for plumbing vehicles; and ultrafine filters for assuring fuel purity. Nozzles and receptacles have been tested and conform with ANSI NGV1-94 Standard
Parker's PS Series Swivels are designed to meet the application needs and performance requirements of the market. Pressure capabilities up to 5000 psi, 1/4" through 2" body sizes, a variety of port options, zinc with yellow chromate or nickel plating, and a wide range or seal options make the PS Series ideal for an array of dynamic high pressure applications.
