Parker JBL Division (TSD Division)

Overview: JBL’s Extrusion and Cut Products have been used in a large variety of high volume applications for over 35 years. Our unique process for producing precision extrusion and cut static seals provides customers a tremendous amount of design flexibility with typically no tooling charge for any ID/OD combination from .040" to 3.000" outside diameters. Extrusion and Cut Products are primarily supplied as ID/OD tubing type cross-sections, but are also supplied in a variety of different cross-sections such as: square, rectangular, triangular and many other profiles.

Overview: JBL Division's precision extrusion and spliced products offer an ideal, cost-effective sealing solution for many applications. These include low-closure force seals, large diameter profiles that cannot be molded, or requirements for Hollow-O-rings, non-standard O-rings and other extruded profiles with an inside diameter larger than 2.500 inches.

Extruded and Spliced parts provide the designer with a tremendous amount of flexibility and can be attached/assembled into grooves or onto flat surfaces.

Overview: JBL offers many extruded profiles in Solid & Hollow-O, Solid & Hollow-D, U-Channel, Rectangular, Solid & Hollow Square, and Hollow-Dart configurations. Custom shapes for design optimization are also available by calling or faxing your drawing to JBL’s Applications Engineering Department. Long Length Extrusions are typically supplied on spools or packaged in coils and can be provided with Pressure Sensitive Adhesive (PSA) for extruded profiles with a flat surface and a minimal .125" width for the PSA.