Parker Quick Coupler
Division
Pneumatic
Hydraulic Diagnostics
Check Alternative Fuels
Swivels
 Pneumatic
Couplings
Pneumatic
couplings, also referred to as single shut-off (SSO) couplings, are
typically used in compressed air applications to connect air tools,
equipment and hoses. Additional applications include
other gases and low pressure liquids. Parker pneumatic couplings are
offered in a wide range of interchanges, sizes, materials, ports and other
options to satisfy most every pneumatic application
 Hydraulic
Couplings
Wide
variety of designs each tailored to a particular application. Based on
valving, hydraulic couplings generally are either Double Shut-Off or
Straight-Thru. Double Shut-Off couplings contain shut-off valves in both
halves, body and nipple. Used extensively when loss of fluid is undesirable.
Straight-Thru couplings have no valves in either half and are ideal for
maximum flow applications.
Diagnostic Equipment
With Parker diagnostic
equipment you can take critical measurements from your system with
just a push of a button. Parker diagnostic instruments are designed to
identify hard-to detect variations and peaks in pressures,
temperatures and flow. Parker diagnostic quick
couplings and nipples allow quick and easy access into hydraulic or pneumatic
systems at remote test points without the use of tools. Diagnostic nipples can be
permanently installed in threaded test ports in hydraulic components
such as valves, cylinders, accumulators, filters or pumps. Diagnostic tube ends,
used in conjunction with a 37° flare, bite type, or O-ring face seal
tube fitting, will allow you to take pressure readings in your systems
tubing and hose lines where threaded test ports may not currently be
available. From diagnostic nipples
to digital readout and printing equipment, Parker can provide you,
from over 600 stocking distributors, the tools necessary to increase
your productivity through reduced machine downtime.
 Check
Valves
Unidirectional
flow control devices used primarily in hydraulic systems to
eliminate potential damage caused by fluid backpressure.
Configurations include standard in-line, cartridge style, and
split-flange mounting units.
Alternative
Fuels
Parker
Hannifin is a world leader in the design and manufacture of
high-quality components used for CNG (compressed natural gas) and
LNG (liquid natural gas) applications on vehicles, fueling and
dispensing equipment. Parker offers the most complete selection of
connector products including:
NGV1 profile nozzles and receptacles for efficient fueling, and
hose for dispensing; fittings and valves for plumbing vehicles; and ultrafine
filters for assuring fuel purity. Nozzles and receptacles have been tested and
conform with ANSI NGV1-94 Standard
Swivels
Parker's
PS Series Swivels are designed to meet the application needs
and performance requirements of the market. Pressure
capabilities up to 5000 psi, 1/4" through 2" body
sizes, a variety of port options,
zinc with yellow chromate or nickel plating, and a wide range
or seal options make the PS Series ideal for an array of
dynamic high pressure applications.
| 
