Parker JBL Division (TSD Division)
Overview: JBL’s Extrusion and Cut Products have been used
in a large variety of high volume applications for over 35 years. Our unique
process for producing precision extrusion and cut static seals provides
customers a tremendous amount of design flexibility with typically no tooling
charge for any ID/OD combination from .040" to 3.000" outside
diameters. Extrusion and Cut Products are primarily supplied as ID/OD tubing
type cross-sections, but are also supplied in a variety of different
cross-sections such as: square, rectangular, triangular and many other profiles.
Overview: JBL Division's precision extrusion and spliced
products offer an ideal, cost-effective sealing solution for many applications.
These include low-closure force seals, large diameter profiles that cannot be
molded, or requirements for Hollow-O-rings, non-standard O-rings and other
extruded profiles with an inside diameter larger than 2.500 inches.
Extruded and Spliced parts provide the designer with a tremendous amount of
flexibility and can be attached/assembled into grooves or onto flat surfaces.
Overview:
JBL offers many extruded profiles in Solid & Hollow-O, Solid & Hollow-D,
U-Channel, Rectangular, Solid & Hollow Square, and Hollow-Dart
configurations. Custom shapes for design optimization are also available by
calling or faxing your drawing to JBL’s Applications Engineering Department.
Long Length Extrusions are typically supplied on spools or packaged in coils and
can be provided with Pressure Sensitive Adhesive (PSA) for extruded profiles
with a flat surface and a minimal .125" width for the PSA.
Overview: JBL’s Injection Molded and Lathe Cut Products are an ideal
solution for high volume, high precision Larger Diameter Sealing Requirements
> 2.500" OD.
Injection Molded Sleeves are molded perfectly round utilizing sealing
grade elastomers. After Injection Molding the sleeves are then precision lathe
cut for a variety of automotive and general industrial applications.
| 
