Partek
High Purity Valves High
Purity Fittings Other High Purity
Products High Purity Tubing
The Partek facilities manufacture flow control components suited for use in
fluid systems where corrosion protection is required or where purity of the
media must be safeguarded. The wetted surfaces of all products are of chemically
inert, corrosion-resistant PFA & PTFE. External materials used are anodized
6061-T6 aluminum, polyethylene (HDPE), polyvinylchloride (PCV), polyvinylidene
fluoride (PVDF), or Perfluoroalkoxy (PFA). ABS plastic knobs are used in some
products.
Partek serves global markets with a broad range of high quality products
including:
- Valves
- Regulators
- Flow Meters
- Pumps
- Gauge Protector
- Spray Guns
- Fittings
- Tubing & Pipe
- Tools & Accessories
These products are used in a variety of applications including semiconductor
manufacturing; chemical, food, and pharmaceutical processing; and biomedical and
analytical instrumentation.
Material
Properties
PTFE fluorocarbon resins, among the most versatile of all plastics, are
rapidly becoming the material of choice for applications involving corrosion
resistance. The strong interatomic bonds between carbon and fluorine atoms, and
the almost perfect shielding of the polymer’s carbon backbone by fluorine
atoms make the material inert to most industrial chemicals and solvents.
PFA, a close relation, has properties rivaling those of PTFE. Its excellent
melt-processing permits conventional thermoplastic molding and high-speed
extrusion processing. Additionally, it has higher mechanical strength at
elevated temperatures (to 500° F).
Custom Specifications
Special orders and custom configuration of standard products are available.
Additionally, all products can be manufactured to metric dimensions. All Partek
products can be cleaned, assembled, tested and bagged in controlled environment.
Parflare PFA Flare
Fittings
The Partek
Parflare fitting line is ideally suited for any ultra-pure or corrosive chemical
application. The fitting design yields a leak tight connection with minimal dead
volume and can be used in side loading and vibrational applications. The
connection is achieved by a heated flaring process utilizing an external heat
source and PTFE mandrel, or by using Partek’s optional FG Series semiautomatic
electronic flaring tools.
Pargrip PFA
Gripper Fittings
The Partek
Pargrip Fitting is ideally suited for use in corrosive environments and chemical
applications. The fitting design yields a leak-tight connection and requires no
special tools to assemble. The connection is achieved by merely inserting the
tubing into the fitting assembly and tightening the nut.
Parbond PFA Bond
Fittings
The Partek
Parbond Fitting line is ideally suited for any ultra-pure or corrosive chemical
application. The fitting design yields a leak-tight, permanent connection that
is ideal for high flow, minimal pressure drop applications. The connection is
achieved by fusion welding the two ends together
PFA Schedule 40
Pipe Fittings
The Partek
Pipe fitting line is ideally suited for any ultra-pure or corrosive chemical
application. The all PFA design yields maximum corrosion resistance. The
fittings are available in a wide variety of configurations and sizes.
Partek/Atlantic manufactures an extensive line of high quality
Fluoropolymer tubing and pipe. A wide range of products are available in PTFE,
FEP, PFA, High Purity PFA, PVDF, and ETFE. Other materials such as PEEK and MFA
are also available on request. All tubing and pipe products are made from 100%
virgin resins.
High Purity PFA (Perfluoroalkoxy) tubing, made from 100% virgin
resin, has the highest molecular weight available. It is manufactured for use in
hostile environments where purity is critical. Testing has proven that these
High Purity PFA products are able to withstand corrosive surfactants for longer
periods of time than the standard products. High Purity PFA products are
available in various sizes upon request.
| 
